- Home
- »
- Our Products
- »
Standby Generator
Leading Manufacturer of 500 kva baudouin standby generator and 1010 kva vaudouin standby generator from Bengaluru.500 kVA Baudouin Standby Generator
Product Details:
| Condition | New |
| Ambient Temperature | 25 deg C |
| Aspiration | TA |
| Barometric Pressure | 100 kPa |
| Bore Size | 127 x 165 mm |
| Compression Ratio | 161 |
| Cylinder Number | 6 |
| Dimension | 2170 x 1134 x 1358 mm ( L x W x H ) |
| Displacement | 12.54 Liter |
| Emission Standard | EU Stage |
| Engine Output Prime | 404 kWm (PRP) |
| Engine Output Standby | 448 kWm ( ESP) |
| Engine Speed | 1800 Rpm |
| Fuel Consumption Tolerances | +/- 5 % |
| Fuel Lower calorific Power | 42 700 kJ/kg |
| Fuel Relative Density | 0.840kg/L |
| Fuel System | Mechanical Pump |
| Governor | Mechanic/Electronic |
| Mean Engine Load Factor | 100% |
| Relative Humidity | 30% |
| Typical Generator Output | 400 kWe,500 kVA |
| Weight | 1120 Kg |
Engine and block:
Cast iron frame style body structure
One-piece forged crankshaft
Split-cap forged steel connecting rods
Separate cast-iron cylinder heads with 4 valves
Replaceable dry cylinder liners
Aluminum alloy pistons with oil cooling gallery
Cooling system:
Radiator and hoses supplied separately
Thermostatically-controlled system with poly belt driven
Coolant pump and pusher fan.
Lubrication system:
Flat bottom large capacity oil pan (36 L)
Spin-on full-flow lub oil filter
Fuel System:
P type fuel injection pump and injector for higher inject pressure Duplex fine filter and water separated filter assembly with the transparent cup.
Air intake and exhaust system:
Mid-position and below inlet turbocharger optimized for industrial application
Special rear mounted air filter with restriction indicator
Silicone tubes and strong clips for pipe connecting
Stainless steel exhaust manifold shield for heat isolation
Electrical system:
24V electric starter motor and battery charging alternator Standard sensor connector.
Flywheel and housing:
SAE1 flywheel housing and 14” flywheel
Callback
1010 kVA Vaudouin Standby Generator
Product Details:
| Ambient Temperature | 25 deg C |
| Bore Size | 150 x 185 mm |
| Displacement | 39.2 Liter |
| Cylinder Number | 12V |
| Compression Ratio | 151 |
| Fuel System | Mechanical Pump |
| Governor | Electronic |
| Aspiration | TA |
| Emission Standard | EU Stage |
| Engine Speed | 1500 RPM |
| Dimensions | 3487 x 2194 x 2246 mm ( L x W x H ) |
| Weight | 4360 Kg |
| Barometric Pressure | 100 kPa |
| Relative Humidity | 30% |
| Fuel Relative Density | 0.840kg/L |
| Fuel Lower Calorific Power | 42 700 kJ/kg |
| Fuel Consumption Tolerances | +/-5% |
| Lube oil Recommend Grade | CF 15W/40 |
We offer 1010 kVA Vaudouin Standby Generator to our clients.
Engine and block:
- Cast iron cylinder block with inspection door per cylinder
- Cast iron cylinder liners, wet type and replaceable valves guides and seats
- Separate cast iron cylinder heads equipped with 4 valves
- Hardened steel forged crankshaft with induction hardened journals
- crankpins and radius
- Lube oil cooled light alloy pistons with high performance piston rings
Cooling system:
- Thermostatically-controlled system with gear coolant pump and pusher fan.
Lubrication system:
- Full flow screwable oil filters
- Lube oil purifier with replaceable cartridge
- Fresh water cooled lube oil cooler
- Manual oil pump, pre-lubricate the engine and ensure good start ability
Fuel system:
- In line injection pump with flanged electronic governor
- Three-level filter integrated electric fuel pump, water separation filter
Air intake and exhaust system:
- Exhaust manifold and turbocharger shield heat isolate
- Air filter and compressor pipe made in injection moulding
Electrical system:
- 24V electric starter motor and battery charging alternator
Flywheel and housing:
- SAE 0 flywheel housing and 18”flywheel
Callback
